Ibg Nockenprüfbox mit optionaler Tastsonde für die Hart/Weich-Prüfung

ibg cam test box, showing also an integrated optional probe for hard/ soft tests

Grinding processes on camshafts are as a matter of principle difficult and can regularly cause residual stress conditions exceeding the specified rate or even cause grinder burn defects like annealing or re-hardening zones in the area of the ramp or the nose.

Crack formation cannot be excluded when producing composite camshafts where single cams are either shrunk by temperature effect on the shaft or joined under pressure. Where in the past the structure conditions from the heat treatment process was often 100% inline tested by means of eddy current, nowadays the focus of interest is more and more a non-destructive 100% test for cracks and grinder burn.

Well, it is a basic requirement for a dynamic eddy current crack test that the probe has a constant distance to the surface, a constant speed and is as perpendicular as possible moving over the test part. Therefore these tests are limited to rotational-symmetrical or flat test parts.

Sondenarm mit zwei keramischen Auflagern und zwischenliegender Sphäro-X-Sonde auf Nockennase.

Pneumatically activated probe arm with two ceramic contact pads. The spherical-X probe is located between these pads.

The development of our cam testbox enables exact tracking of the shape of the cam and thus achieve crack and grinder burn test results which are in no way inferior to results of rotational-symmetrical parts. The testbox may also smoothly follow the shape of pump lobes.

All that is possible with the ibg spherical X-type probe with a visual range of almost 180°. It is placed between two wear-resistant as well as exchangeable and pivotable ceramic disks. With them, the probe arm contacts the cam and follows its shape. The probe arm is equipped with a double pneumatic cylinder, which is like a spring in the one direction to follow the shape and in the other direction it lifts the probe arm from the cam when the system is returned to home position for loading/taking the camshaft. This kind of solution is capable of realising rotational speeds of the camshaft of up to 250 rpm depending on shape of cam. Originating from an effective probe width of 1.5 mm the testbox is moved during the test by the test system over wider cams in order to scan the entire lateral cam surface.

The testbox may be equipped with an additional structure test probe. At the beginning of the test cycle, the cam noses are positioned in front of the structure test probe by the rotary axle one after the other and are tested within milliseconds. This test guarantees for composite camshafts that unhardened cams which can slip through unintentionally into the joining process are reliably detected before the camshaft is mounted in the motor.

Nockengrößen mit Grundkreisen von 20-55 mm Durchmesser sind ohne Wechselteile prüfbar.

The test box allows the test of cams with basic diameter from  20 to 55 mm, without the need of changing any part.

The testbox is equipped by default with an inductive sensor which sends a trigger signal to the test instrument once per revolution.

The eddyvisorC is able to work with up to 16 crack detection probes simultaneously and independently on your camshaft. Thus the 100% crack and grinder burn test can meet cycle times of fast production lines.

CONTACT

ibg SWISS AG
Galgenried 6
CH-6370 Stans Switzerland

+41 41 612 26 50
info@ibgndt.ch

DOWNLOAD

Trade fairs

27.-29.02.2020
Fastener Fair
Istanbul, Turkey
Booth 12-250

 

10.-13.03.2020
SIMODEC
La Roche sur Foron, France
HALL D – Stand M76

 

05.-08.05.2020
CONTROL
Stuttgart, Germany
Booth 6-6113

 

13.-16.05.2020
Bearing Shanghai
Shanghai, China
Booth 61C088

 

18.-20.05.2020
Fastener Fair
Charlotte, NC, USA
Booth 339

 

14.-19.09.2020
IMTS
Chicago, IL, USA

 

09.-12.11.2020
ASNT Annual Conference
Orlando, FL, USA